!
Dust returning days after the final clean
Fine particles settle out of the air slowly, so a single pass looks finished then fails.
Drywall dust keeps resettling for weeks after the trades leave
Post-Construction Cleaning in Myrtle Beach
One pass at the end never holds. Dust hides above ceilings and in vents, then falls back onto everything you just cleaned.
Free walkthrough · Staged around your trades · No obligation
The problem
Common Problems We Solve
Each of these is a specific failure businesses describe to us, not a general complaint about cleaning standards.
!
Vents circulating debris into a finished space
Construction dust pulled into the system blows back out over new surfaces once HVAC runs.
!
Adhesive, paint and sealant left on finishes
Splashes and residue on glass, fixtures and floors need removing without damaging them.
!
Handover dates slipping
A space that is not presentable delays inspection, occupancy and the start of rent.
!
Damage caused by the wrong cleaning method
New finishes are easily scratched or dulled by aggressive products used in a hurry.
Scope of work
What is Included in Our Post-Construction Cleaning
Everything below goes into your written scope with a frequency against it, so there is never a question about what was agreed.
What changes
Benefits of Professional Post-Construction Cleaning
✓
Dust that stays gone
Staged cleaning removes the source instead of relocating it, so the space still looks finished a week later.
✓
Handover dates that hold
The space is presentable when the inspection is booked, not a day or two after it.
✓
New finishes protected
Methods matched to each material, so nothing is dulled or scratched during the clean.
✓
A confident first walkthrough
Clients and tenants see the finished work rather than the mess around it.
✓
Clean air from day one
Clearing vents before HVAC runs stops construction dust circulating into an occupied space.
How it works
How Our Post-Construction Cleaning Process Works
→
Assessment
We review the build schedule and plan the clean around trade sequencing, not after everyone has gone.
→
Custom plan
You get a staged scope: rough clean, detailed clean and a touch-up timed to your handover date.
→
Scheduled service
Crews work top down and allow airborne dust to settle between passes rather than cleaning into it.
→
Quality checks
We walk the space with you before sign-off, because handover standards are judged by eye.
→
Ongoing support
Once occupied, the same building can move onto a recurring scope without a second walkthrough.
Who this suits
Ideal For
New commercial fit-outs
First impressions on a space nobody has occupied yet.
Office renovations
Dust reaching occupied areas beyond the work zone.
Retail build-outs
Tight opening dates where the clean sits on the critical path.
Medical and dental fit-outs
Spaces that must be clinically clean before first use.
Restaurant build-outs
Kitchen and service areas facing a health inspection.
Property managers
Units that need to show and let immediately after works.
Working with us
What You Can Hold Us To
Handover dates depend on the clean being right first time, so every commitment below is one a project manager can check.
✓
A staged written plan
Each pass is scoped and scheduled against your build timeline, so nothing waits until the end.
✓
Finishes handled correctly
Methods are matched to new materials, so nothing is dulled or scratched during the clean.
✓
A walkthrough before sign-off
We check the space with you, because handover standards are judged by eye and not by a checklist.
✓
Dates we plan around
The clean is built around your handover, not fitted in whenever a crew happens to be free.
Pricing
Transparent and Custom Pricing
Post-construction pricing follows the number of stages and the finishes involved. A single final pass on a dusty site is poor value however cheap it looks.
•
Size of your facility
Ceiling height and the amount of exposed ductwork affect the price more than floor area does.
•
Cleaning frequency
A staged clean across three passes costs less overall than repeatedly re-cleaning a dusty space.
•
Traffic level
How many trades are still working decides whether the space can be finished or needs revisiting.
•
Specific requirements
Adhesive and sealant removal, delicate finishes and protected surfaces each add scoped time.
Transparent pricing · No hidden fees · No long-term contract required
Common questions
Post-Construction Cleaning Questions
When should post-construction cleaning be scheduled?
Ideally in stages: a rough clean between trades, a detailed clean once work finishes, and a touch-up right before handover. Booking only the final pass is why dust reappears.
Do you clean during construction or only at the end?
Both. Clearing debris between trades keeps the site workable and makes the final clean faster and more effective.
How do you stop dust coming back?
By working top down, clearing vents and above-ceiling ledges, and allowing airborne dust to settle between passes rather than cleaning into a dusty atmosphere.
Can you work around our contractors' schedule?
Yes. Post-construction work is planned around trade sequencing, including nights and weekends where the schedule needs it.
Is this different from a regular deep clean?
Yes. Construction dust is finer and more pervasive, and new finishes need specific handling. It also involves removing adhesive, paint and sealant residue that deep cleaning does not.
Also available
Other Services in Myrtle Beach
Free assessment
Get Your Free Post-Construction Cleaning Quote
Tell us about your building and what keeps going wrong. We will walk it, write the scope, and price post-construction cleaning from what is actually there.
Prefer to talk? Call (854) 504-2770 or email [email protected].
Tell us about your building
No obligation, and we will not add you to a mailing list.
Free assessment · Response within one business day · No obligation